specificatio n (reference sheet) ? supplier : samsung electro-mechanics ? samsung p/n: CL05A105KP5NNNC ? product : multi-layer ceramic capacitor ? description : cap, 1 ? , 10v, 10%, x5r, 0402 cl 05 a 105 k p 5 n n n c ? ?? series samsung multi-layer ceramic capacitor size 0402 (inch code) l: 1.0 0.05 mm w: 0.05 mm dielectric inner electrode capacitance 1 ? termination capacitance 10 % plating (pb free) tolerance product normal rated voltage 10 v special reserved for future use thickness 0.5 0.05 mm ? packaging cardboard type, 7" reel b. samsung reliability test and judgement condition capacitance within specified tolerance 1 ? 10% 1.00.2vrms tan (df) 0.1 max. insulation 10,000mohm or 100mohm ? ? rated voltage 60~120 sec. resistance whichever is smaller appearance no abnormal exterior appearance microscope (10) withstanding no dielectric breakdown or of the rated voltage voltage mechanical breakdown temperature x5r characteristics (from -55 to 85 , capacitance change should be within 15%) adhesive strength no peeling shall be occur on the 500g f, for 101 sec. of termination terminal electrode bending strength capacitance change : within 12.5% bending to the limit (1mm) with 1.0mm/sec. solderability more than 75% of terminal surface snag3.0cu0.5 solder is to be soldered newly 2455 , 30.3sec. (preheating : 80~120 for 10~30sec.) resistance to capacitance change : within 7.5% solder pot : 2705 , 101sec. soldering heat tan , ir : initial spec. sn 100% cu ni 250% judgement test condition x5r a. samsung part number 0.5
vibration test capacitance change : within 5% amplitude : 1.5mm tan , ir : initial spec. from 10 ? to 55 ? (return : 1min.) 2hours 3 direction (x, y, z) moisture capacitance change : within 12.5% with rated voltage resistance tan 0.2 max 402 , 90~95%rh, 500+12/-0hrs ir : 12.5 ? ? or over high temperature capacitance change : within 12.5% wit h of the rated voltage resistance tan 0.2 max max. operating temperature ir : 25 ? ? or over 1000+48/-0hrs temperature capacitance change : within 7.5% 1 cycle condition cycling tan , ir : initial spec. min. operating temperature 25 max. operating temperature 25 5 cycle test c. recommended soldering method : reflow ( reflow peak temperature : 260+0/-5 , 10sec. max ) product specifications included in the specifications are effective as of march 1, 2013. please be advised that they are standard product specifications for reference only. we may change, modify or discontinue the product specifications without notice at any time. so, you need to approve the product specifications before placing an order. should you have any question regarding the product specifications, please contact our sales personnel or application engineers. 150% judgement test condition
|
